ELECTROLYTE AND PLASMA PROCESSING (EPP) – proper time to glare!

IF YOU NEED TO 

clear joint weld 
blunt sharp edges
provide a perfect
product outlook
degrease the surface
and 
prepare it for
coating application

IF YOU NEED TO 

provide a perfect
product outlook
blunt sharp
edges
polish a product
surface

 increase an environmental
safety of the enterprise
degrease the surface
and 
prepare it for
coating application
remove
rough edges, 
scales,
iridescences,  and dirt
clear joint
weld
add a full gloss
to a product

WE WILL DEVELOP THE TECHNOLOGY
AND PRODUCE THE EQUIPMENT FOR THE EPP CUSTOM-BUILT

More videos on our channel!

We will develop the technology and produce the equioment for the EPP CUSTOM-BUILT

ECO-FRIENDLY
ELECTROPOLISHING

Modern and safe method of polishing
metals to sensational roughness
Ra 0,01 micron
Free proof running
of the products.NEW!
Employees training
Warranty and servicing
Installation and fettling
of equipment at your enterprise
Development of the technology
for a wide range of  products polishing:

ECO-FRIENDLY ELECTROPOLISHING

Modern and safe method of polishing metals to sensational roughness Ra 0,01 micron

Free proof running
of the products from stainless steel,
low-carbon steel, cooper alloy,
aluminium, titanium, zirconium,
and niobium.
NEW!
Development of the technology
for a wide range of products polishing:
internal and external surfaces of complex
shape products, small section and stiffness
products and long components.
Equipment manufacturing
with a capacity from 3 to 1000 kW
with a maximum area of parallel
treated surfaces up to 280 sq.dm.
Installation and fettling
of equipment at your enterprise
Employees training
Warranty and servicing

We’ll make FREE SAMPLES PROOF RUNNING, so that you were convinced of the high quality surface of your products after polishing by EPP method!

We’ll make FREE SAMPLES PROOF RUNNING, so that you were convinced of the high quality surface of your products after polishing by EPP method!

ADVANTAGES

eco-friendly manufacture
improvement of labour
conditions for EPP employees
the used electrolyte is 95% water.
Easily recycled by traditional methods
we’ll undertake even the most
difficult and “hopeless” orders
the payback period for the
EPP equipment is 1.5-2 years

ADVANTAGES

Decrease in current cost
of polishing by 30-40% .
The payback period for the
EPP equipment is 1.5-2 years
Eco-friendly manufacture.
Reduction of the toxic acids solutions
usage by 100%. There are acid vapor.
There is no smell during polishing.
The working bath is not corroded and
is operated during the entire life of
the EPO equipment – it is more than 15 years!
The used electrolyte is 95% water.
Easily recycled by traditional methods.
Use of standard ventilation systems
to remove generated water vapor.
Improvement of labour conditions
for EPP employees: 2nd class – allowable
labour conditions. Reducing the PPE cost
(personal protective equipment).
Minimum training of employees
We’ll undertake even the
most difficult and “hopeless”
orders thanks to a long-term scientific
experience and our own developments
Specific equipment manufactured by us:
Device for polishing of surgical curved
needles, a product for locators, a detail of
an air conditioning systems for military
planes from aluminium-magnesium alloy
EPP technology can be also used for the form making

EPP technology can be also used for the form making

Ideal technological solution for enterprises applying finishing methods of processing

plumbing equipment:
cranes, decorative linings,
coils, towel warmers
details of lighting
devices: reflectors, housings
furniture fittings:
handles, decorative linings,
furniture supports
details of commercial
equipment: hooks,  hangers, holders
food products from stainless
steels: lodges, forks, knives,
plates, blades, saucers
products of medical equipment:
surgical needles, dental and bone
implants, cranial plates, spinal
fixators, sheets, foil and wire used
for bonding tissues, etc.
complex shape products:
different from the rotation
details,  workpieces with cavities,
undercuts, protruding structural elements

Ideal technological solution for enterprises applying finishing methods of processing

plumbing equipment:
cranes, decorative linings,
coils, towel warmers
details of lighting
devices: reflectors, housings
furniture fittings:
handles, decorative linings,
furniture supports
details of commercial
equipment: hooks,
hangers, holders
food products from stainless
steels: lodges, forks, knives,
plates, blades, saucers
products of medical equipment:
surgical needles, dental and bone
implants, cranial plates, etc.
complex shape products:
different from the rotation
details, protruding structural elements

The implementation of EPP equipment for the titanium alloys products polishing instead of electrochemical polishing will annually reduce the release of toxic hydrofluoric acid into the atmosphere by 30 tons all over the world!

The implementation of EPP equipment will annually reduce the release of toxic hydrofluoric acid into the atmosphere by 30 tons all over the world!

WE’LL DESIGN AND SYPPLY A PROCESS SECTION "TURN-KEY" FOR YOU

Optimal combination of equipment, hardening and restoration technologies of car workpieces at your own enterprise

WE’LL DESIGN AND SYPPLY A PROCESS SECTION "TURN-KEY" FOR YOU

Optimal combination of equipment, hardening and restoration technologies of car workpieces at your own enterprise

Get an instant advice from a competent specialist

with many years of scientific and practical experience in the metalworking field

Get an instant advice from a competent specialist with many years of scientific and practical experience in the metalworking field

WE’LL CALCULATE THE COST
OF ORDER 
ACCORDING
TO YOUR OWN ESQUISSES

Please send us technical specifications,
drawings, drafts or photos of products
photos to our e-mail
s-galgo65@park.bntu.by

Or call +(375 29) 762 68 17

 ПРИМЕРЫ ВЫПУСКАЕМОГО ОБОРУДОВАНИЯ

icon

Установка ЭПО-25

Полирование хирургических игл диаметром от 0,3 до 1,0 мм.
Мощность 25 кВт.

icon

Установка ЭПО-100

Обработка товаров народного потребления.
Мощность 100 кВт.

icon

Установка ЭПО-40

Полировка и удаление заусенцев деталей систем кондиционирования.
Мощность 40 кВт.

icon

Установка ЭУ-2-15

Полирование гибких длинномерных изделий длиной до 850 мм.

icon

Установка ЭПО-250

Полирование товаров народного потребления.
Мощность 250 кВт.

icon

Установка ЭПО-250

Полирование товаров народного потребления.
Мощность 250 кВт.

icon

Установка ЭРОМ-1112

Полировка и очистка деталей топливной аппаратуры дизельных двигателей.
Мощность 72 кВт.

icon

Установка ЭРОМ-16

Обработка предметов народного потребления (клюшки для гольфа, очковые оправы и т.п.)
Мощность 150 кВт.

icon

Установка AFS-250

Обработка ножей кухонных комбайнов, столовых приборов.
Мощность 250 кВт.

icon

Установка ЭРОМ-21

Обработка трубчатых полотенцесушителей из нержавеющей стали.
Мощность 250 кВт.

icon

Установка ЭПО-3

Для лабораторных исследований.
Мощность 3 кВт.

Top