HARDENING OF PARTS BY MODERN METHODS
Increasing the strength of the elements of mechanisms for protection against deformation and destruction. Grip durable alloys with vulnerable surfaces
HARDENING OF PARTS BY MODERN METHODS
Increasing the strength of the elements of mechanisms for protection against deformation and destruction. Grip durable alloys with vulnerable surfaces
FLAME SPRAY
Coating with specified parameters on a wide range of parts
service life of parts is increased
by 1.5-7.5 times depending
on the working conditions
we will apply coatings on parts
of complex configuration up to
2.5 meters in length,
weighing up to 350 kg,
with a diameter of up to 250 mm
the cost of the restored
product is 30-50% of
the cost of the new one
FLAME SPRAY
Coating with specified parameters on a wide range of parts
service life of parts is increased
by 1.5-7.5 times depending
on the working conditions
we will apply coatings on parts
of complex configuration up to
2.5 meters in length,
weighing up to 350 kg,
with a diameter of up to 250 mm
the cost of the restored
product is 30-50% of
the cost of the new one
The possibility of applying coatings of various functional origins!
The possibility of applying coatings of various functional origins!
Obtaining coatings with predetermined
physico-mechanical properties
universality and applicability
to most products
Availability and simplicity
of technology
High quality Hermann Sharc
ionizing welding and surfacing
equipment
Obtaining coatings with predetermined
physico-mechanical properties
universality and applicability
to most products
Availability and simplicity
of technology
High quality Hermann Sharc
ionizing welding and surfacing
equipment
Is it difficult to choose an applicable way of enhancing wear-resistance?
Is it difficult to choose an applicable way
of enhancing wear-resistance?
PLASMA SURFACING
there is no necessity
of the additional
mechanical treatment
Plasma arc is the most
effective source of
heating
The possibility of making thickness
of deposit welding layer from
0.1 mm to couple of millimeters
Small (in comparison with other
types of surfacing) mixing of
lining material with the foundation
PLASMA SURFACING
there is no necessity
of the additional
mechanical treatment
Plasma arc is the most
effective source of
heating
The possibility of making thicknessa
of deposit welding layer from
0.1 mm to couple of millimeters
Small (in comparison with other
types of surfacing) mixing of
lining material with the foundation
Do you want to know more?
We will answer all your questions!
Do you want to know more?
We will answer all your questions!
VACUUM-PLASMA TREATMENT
Coating of nitrides, carbides, metal carbonitrides, diamond-like carbon
we will perform
a trial coating on
your products
we will make and deliver
the equipment for
the developed technology
it is possible to develop
and supply multifunctional
equipment
VACUUM-PLASMA TREATMENT
Coating of nitrides, carbides, metal carbonitrides, diamond-like carbon
we will perform
a trial coating on
your products
we will make and deliver
the equipment for
the developed technology
it is possible to develop
and supply multifunctional
equipment
Induction hardening HFC is the most efficient and technologically advanced method of hardening!
Induction hardening HFC is the most efficient and technologically advanced method of hardening!
HEAT TREATMENT WITH HFC HEATING
Hardening by accelerated cooling in a special environment
high efficiency of the process of hardening
parts due to the heating of local
areas of surfaces of products
the lack of large warpage
and leash allows to reduce
reduce the allowance for finishing
no scale formation on the surface
of the part as well as oxidation and
decarburization of the upper layer
HEAT TREATMENT
WITH HFC HEATING
Hardening by accelerated cooling in a special environment
high efficiency of the process of hardening
parts due to the heating of local
areas of surfaces of products
the lack of large warpage
and leash allows to reduce
reduce the allowance for finishing
no scale formation on the surface
of the part as well as oxidation and
decarburization of the upper layer
DO YOUR DETAILS NEED HARDENING?
We are ready to help you!
+(375 29) 762 68 17
DO YOUR DETAILS NEED HARDENING?
We are ready to help you!
WordPress database error: [Table 'metolitc_prometal.wp_mwp_side_menu_free' doesn't exist]
select * from wp_mwp_side_menu_free ORDER BY menu_order ASC
Республиканское инновационное унитарное предприятие
"Научно-технологический парк БНТУ “Политехник”